From c001e730e4fa3d43bc2312d6fe778be262158385 Mon Sep 17 00:00:00 2001 From: dmacias72 Date: Wed, 27 Apr 2016 21:52:37 -0600 Subject: [PATCH] remove --- ipmi.config | 558 ---------------------------------------------------- 1 file changed, 558 deletions(-) delete mode 100755 ipmi.config diff --git a/ipmi.config b/ipmi.config deleted file mode 100755 index 1f89b46c..00000000 --- a/ipmi.config +++ /dev/null @@ -1,558 +0,0 @@ -Section 3_+5VSB - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 4.710000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 4.230000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 5.550000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 5.610000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 4_+3VSB - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 2.820000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 2.780000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 3.660000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 3.680000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 5_Vcore - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Critical_Threshold 0.600000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 0.560000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 0.540000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Critical_Threshold 1.490000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 1.560000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 1.640000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 6_VCCM - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 1.120000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 1.090000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 1.720000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 1.750000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 7_+1.1V - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Critical_Threshold 0.940000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 0.890000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 0.850000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Critical_Threshold 1.150000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 1.210000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 1.270000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 8_+1.0V - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Critical_Threshold 0.940000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 0.890000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 0.850000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Critical_Threshold 1.150000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 1.210000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 1.270000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 9_BAT - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 2.500000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 2.380000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 3.580000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 3.680000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 10_+3V - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 2.820000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 2.780000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 3.660000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 3.680000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 11_+5V - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 4.710000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 4.230000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 5.550000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 5.610000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 12_+12V - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low No - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Recoverable_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Recoverable_Going_High Yes - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Critical_Threshold 10.300000 - ## Give valid input for sensor type = Voltage; units = Volts - Lower_Non_Recoverable_Threshold 10.100000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Critical_Threshold 13.300000 - ## Give valid input for sensor type = Voltage; units = Volts - Upper_Non_Recoverable_Threshold 13.400000 - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Voltage; units = Volts; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 13_CPU_FAN1 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 14_REAR_FAN1 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 15_FRNT_FAN1 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 16_FRNT_FAN2 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 17_REAR_FAN2 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 18_CPU_FAN2 - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Lower_Non_Critical_Going_Low Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Lower_Non_Critical_Going_Low Yes - ## Give valid input for sensor type = Fan; units = RPM - Lower_Non_Critical_Threshold 100.000000 - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Fan; units = RPM; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 19_MB_Temperature - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High No - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High No - ## Give valid input for sensor type = Temperature; units = degrees C; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Temperature; units = degrees C; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection -Section 20_CPU_Temperature - ## Possible values: Yes/No - Enable_All_Event_Messages Yes - ## Possible values: Yes/No - Enable_Scanning_On_This_Sensor Yes - ## Possible values: Yes/No - Enable_Assertion_Event_Upper_Non_Critical_Going_High Yes - ## Possible values: Yes/No - Enable_Deassertion_Event_Upper_Non_Critical_Going_High Yes - ## Give valid input for sensor type = Temperature; units = degrees C - Upper_Non_Critical_Threshold 80.000000 - ## Give valid input for sensor type = Temperature; units = degrees C; 'None' to not use hysteresis - Positive_Going_Threshold_Hysteresis None - ## Give valid input for sensor type = Temperature; units = degrees C; 'None' to not use hysteresis - Negative_Going_Threshold_Hysteresis None -EndSection