Flummi/f0.gg-kreedzsrv
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
f0.gg-kreedzsrv/amxmodx/scripting/include/curl_consts.inc
Flummi 7160566a94 blah
2021-07-25 14:20:46 +02:00

1325 lines
52 KiB
PHP
Raw Blame History

#if defined _curlconst_included
#endinput
#endif
#define _curlconst_included
#define CURL_ERROR_SIZE 256
/*#if defined(WIN32)
#define CURL_SOCKET_BAD (~0)
#else
#define CURL_SOCKET_BAD -1
#endif*/
#define CURLPAUSE_RECV (1<<0)
#define CURLPAUSE_RECV_CONT (0)
#define CURLPAUSE_SEND (1<<2)
#define CURLPAUSE_SEND_CONT (0)
#define CURLPAUSE_ALL (CURLPAUSE_RECV|CURLPAUSE_SEND)
#define CURLPAUSE_CONT (CURLPAUSE_RECV_CONT|CURLPAUSE_SEND_CONT)
/* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */
#define CURLPROTO_HTTP (1<<0)
#define CURLPROTO_HTTPS (1<<1)
#define CURLPROTO_FTP (1<<2)
#define CURLPROTO_FTPS (1<<3)
#define CURLPROTO_SCP (1<<4)
#define CURLPROTO_SFTP (1<<5)
#define CURLPROTO_TELNET (1<<6)
#define CURLPROTO_LDAP (1<<7)
#define CURLPROTO_LDAPS (1<<8)
#define CURLPROTO_DICT (1<<9)
#define CURLPROTO_FILE (1<<10)
#define CURLPROTO_TFTP (1<<11)
#define CURLPROTO_IMAP (1<<12)
#define CURLPROTO_IMAPS (1<<13)
#define CURLPROTO_POP3 (1<<14)
#define CURLPROTO_POP3S (1<<15)
#define CURLPROTO_SMTP (1<<16)
#define CURLPROTO_SMTPS (1<<17)
#define CURLPROTO_RTSP (1<<18)
#define CURLPROTO_RTMP (1<<19)
#define CURLPROTO_RTMPT (1<<20)
#define CURLPROTO_RTMPE (1<<21)
#define CURLPROTO_RTMPTE (1<<22)
#define CURLPROTO_RTMPS (1<<23)
#define CURLPROTO_RTMPTS (1<<24)
#define CURLPROTO_GOPHER (1<<25)
#define CURLPROTO_ALL (~0) /* enable everything */
/*
* Bitmasks for CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH options:
*
* CURLAUTH_NONE - No HTTP authentication
* CURLAUTH_BASIC - HTTP Basic authentication (default)
* CURLAUTH_DIGEST - HTTP Digest authentication
* CURLAUTH_GSSNEGOTIATE - HTTP GSS-Negotiate authentication
* CURLAUTH_NTLM - HTTP NTLM authentication
* CURLAUTH_DIGEST_IE - HTTP Digest authentication with IE flavour
* CURLAUTH_NTLM_WB - HTTP NTLM authentication delegated to winbind helper
* CURLAUTH_ONLY - Use together with a single other type to force no
* authentication or just that single type
* CURLAUTH_ANY - All fine types set
* CURLAUTH_ANYSAFE - All fine types except Basic
*/
#define CURLAUTH_NONE 0
#define CURLAUTH_BASIC (1<<0)
#define CURLAUTH_DIGEST (1<<1)
#define CURLAUTH_GSSNEGOTIATE (1<<2)
#define CURLAUTH_NTLM (1<<3)
#define CURLAUTH_DIGEST_IE (1<<4)
#define CURLAUTH_NTLM_WB (1<<5)
#define CURLAUTH_ONLY (1<<31)
#define CURLAUTH_ANY (~CURLAUTH_DIGEST_IE)
#define CURLAUTH_ANYSAFE (~(CURLAUTH_BASIC|CURLAUTH_DIGEST_IE))
#define CURLSSH_AUTH_ANY ~0 /* all types supported by the server */
#define CURLSSH_AUTH_NONE 0 /* none allowed, silly but complete */
#define CURLSSH_AUTH_PUBLICKEY (1<<0) /* public/private key files */
#define CURLSSH_AUTH_PASSWORD (1<<1) /* password */
#define CURLSSH_AUTH_HOST (1<<2) /* host key files */
#define CURLSSH_AUTH_KEYBOARD (1<<3) /* keyboard interactive */
#define CURLSSH_AUTH_AGENT (1<<4) /* agent (ssh-agent, pageant...) */
#define CURLSSH_AUTH_DEFAULT CURLSSH_AUTH_ANY
#define CURLGSSAPI_DELEGATION_NONE 0 /* no delegation (default) */
#define CURLGSSAPI_DELEGATION_POLICY_FLAG (1<<0) /* if permitted by policy */
#define CURLGSSAPI_DELEGATION_FLAG (1<<1) /* delegate always */
/* symbols to use with CURLOPT_POSTREDIR.
CURL_REDIR_POST_301, CURL_REDIR_POST_302 and CURL_REDIR_POST_303
can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302
| CURL_REDIR_POST_303 == CURL_REDIR_POST_ALL */
#define CURL_REDIR_GET_ALL 0
#define CURL_REDIR_POST_301 1
#define CURL_REDIR_POST_302 2
#define CURL_REDIR_POST_303 4
#define CURL_REDIR_POST_ALL \
(CURL_REDIR_POST_301|CURL_REDIR_POST_302|CURL_REDIR_POST_303)
/* bitmask defines for CURLOPT_HEADEROPT */
#define CURLHEADER_UNIFIED 0
#define CURLHEADER_SEPARATE (1<<0)
/* Below here follows defines for the CURLOPT_IPRESOLVE option. If a host
name resolves addresses using more than one IP protocol version, this
option might be handy to force libcurl to use a specific IP version. */
#define CURL_IPRESOLVE_WHATEVER 0 /* default, resolves addresses to all IP
versions that your system allows */
#define CURL_IPRESOLVE_V4 1 /* resolve to ipv4 addresses */
#define CURL_IPRESOLVE_V6 2 /* resolve to ipv6 addresses */
/* Definition of bits for the CURLOPT_SSL_OPTIONS argument: */
/* - ALLOW_BEAST tells libcurl to allow the BEAST SSL vulnerability in the
name of improving interoperability with older servers. Some SSL libraries
have introduced work-arounds for this flaw but those work-arounds sometimes
make the SSL communication fail. To regain functionality with those broken
servers, a user can this way allow the vulnerability back. */
#define CURLSSLOPT_ALLOW_BEAST (1<<0)
/* This is a magic return code for the write callback that, when returned,
will signal libcurl to pause receiving on the current transfer. */
#define CURL_WRITEFUNC_PAUSE 0x10000001
/* This is a return code for the read callback that, when returned, will
signal libcurl to immediately abort the current transfer. */
#define CURL_READFUNC_ABORT 0x10000000
/* This is a return code for the read callback that, when returned, will
signal libcurl to pause sending data on the current transfer. */
#define CURL_READFUNC_PAUSE 0x10000001
enum curlioerr {
CURLIOE_OK, /* I/O operation successful */
CURLIOE_UNKNOWNCMD, /* command was unknown to callback */
CURLIOE_FAILRESTART, /* failed to restart the read */
CURLIOE_LAST /* never use */
}
enum curliocmd {
CURLIOCMD_NOP, /* no operation */
CURLIOCMD_RESTARTREAD, /* restart the read stream from start */
CURLIOCMD_LAST /* never use */
}
enum curlsocktype {
CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */
CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */
CURLSOCKTYPE_LAST /* never use */
}
/* The return code from the sockopt_callback can signal information back
to libcurl: */
#define CURL_SOCKOPT_OK 0
#define CURL_SOCKOPT_ERROR 1 /* causes libcurl to abort and return
CURLE_ABORTED_BY_CALLBACK */
#define CURL_SOCKOPT_ALREADY_CONNECTED 2
/*
* Public API enums for RTSP requests
*/
enum {
CURL_RTSPREQ_NONE, /* first in list */
CURL_RTSPREQ_OPTIONS,
CURL_RTSPREQ_DESCRIBE,
CURL_RTSPREQ_ANNOUNCE,
CURL_RTSPREQ_SETUP,
CURL_RTSPREQ_PLAY,
CURL_RTSPREQ_PAUSE,
CURL_RTSPREQ_TEARDOWN,
CURL_RTSPREQ_GET_PARAMETER,
CURL_RTSPREQ_SET_PARAMETER,
CURL_RTSPREQ_RECORD,
CURL_RTSPREQ_RECEIVE,
CURL_RTSPREQ_LAST /* last in list */
}
enum {
CURL_SSLVERSION_DEFAULT,
CURL_SSLVERSION_TLSv1, /* TLS 1.x */
CURL_SSLVERSION_SSLv2,
CURL_SSLVERSION_SSLv3,
CURL_SSLVERSION_TLSv1_0,
CURL_SSLVERSION_TLSv1_1,
CURL_SSLVERSION_TLSv1_2,
CURL_SSLVERSION_LAST /* never use, keep last */
}
/* These enums are for use with the CURLOPT_HTTP_VERSION option. */
enum {
CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
like the library to choose the best possible
for us! */
CURL_HTTP_VERSION_1_0, /* please use HTTP 1.0 in the request */
CURL_HTTP_VERSION_1_1, /* please use HTTP 1.1 in the request */
CURL_HTTP_VERSION_2_0, /* please use HTTP 2.0 in the request */
CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
}
/* These enums are for use with the CURLOPT_NETRC option. */
enum CURL_NETRC_OPTION {
CURL_NETRC_IGNORED, /* The .netrc will never be read.
* This is the default. */
CURL_NETRC_OPTIONAL, /* A user:password in the URL will be preferred
* to one in the .netrc. */
CURL_NETRC_REQUIRED, /* A user:password in the URL will be ignored.
* Unless one is set programmatically, the .netrc
* will be queried. */
CURL_NETRC_LAST
}
enum curl_proxytype {
CURLPROXY_HTTP = 0, /* added in 7.10, new in 7.19.4 default is to use
CONNECT HTTP/1.1 */
CURLPROXY_HTTP_1_0 = 1, /* added in 7.19.4, force to use CONNECT
HTTP/1.0 */
CURLPROXY_SOCKS4 = 4, /* support added in 7.15.2, enum existed already
in 7.10 */
CURLPROXY_SOCKS5 = 5, /* added in 7.10 */
CURLPROXY_SOCKS4A = 6, /* added in 7.18.0 */
CURLPROXY_SOCKS5_HOSTNAME = 7 /* Use the SOCKS5 protocol but pass along the
host name rather than the IP address. added
in 7.18.0 */
} /* this enum was added in 7.10 */
enum curl_infotype {
CURLINFO_TEXT = 0,
CURLINFO_HEADER_IN, /* 1 */
CURLINFO_HEADER_OUT, /* 2 */
CURLINFO_DATA_IN, /* 3 */
CURLINFO_DATA_OUT, /* 4 */
CURLINFO_SSL_DATA_IN, /* 5 */
CURLINFO_SSL_DATA_OUT, /* 6 */
CURLINFO_END
}
/* use this for multipart formpost building */
/* Returns code for curl_formadd()
*
* Returns:
* CURL_FORMADD_OK on success
* CURL_FORMADD_MEMORY if the FormInfo allocation fails
* CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form
* CURL_FORMADD_NULL if a null pointer was given for a char
* CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed
* CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
* CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error)
* CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated
* CURL_FORMADD_MEMORY if some allocation for string copying failed.
* CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array
*
***************************************************************************/
enum CURLFORMcode {
CURL_FORMADD_OK, /* first, no error */
CURL_FORMADD_MEMORY,
CURL_FORMADD_OPTION_TWICE,
CURL_FORMADD_NULL,
CURL_FORMADD_UNKNOWN_OPTION,
CURL_FORMADD_INCOMPLETE,
CURL_FORMADD_ILLEGAL_ARRAY,
CURL_FORMADD_DISABLED, /* libcurl was built with this disabled */
CURL_FORMADD_LAST /* last */
}
/* parameter for the CURLOPT_FTP_FILEMETHOD option */
enum curl_ftpmethod {
CURLFTPMETHOD_DEFAULT, /* let libcurl pick */
CURLFTPMETHOD_MULTICWD, /* single CWD operation for each path part */
CURLFTPMETHOD_NOCWD, /* no CWD at all */
CURLFTPMETHOD_SINGLECWD, /* one CWD to full dir, then work on file */
CURLFTPMETHOD_LAST /* not an option, never use */
}
/* parameter for the CURLOPT_FTP_SSL_CCC option */
enum curl_ftpccc {
CURLFTPSSL_CCC_NONE, /* do not send CCC */
CURLFTPSSL_CCC_PASSIVE, /* Let the server initiate the shutdown */
CURLFTPSSL_CCC_ACTIVE, /* Initiate the shutdown */
CURLFTPSSL_CCC_LAST /* not an option, never use */
}
/* parameter for the CURLOPT_FTPSSLAUTH option */
enum curl_ftpauth {
CURLFTPAUTH_DEFAULT, /* let libcurl decide */
CURLFTPAUTH_SSL, /* use "AUTH SSL" */
CURLFTPAUTH_TLS, /* use "AUTH TLS" */
CURLFTPAUTH_LAST /* not an option, never use */
}
/* parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option */
enum curl_ftpcreatedir {
CURLFTP_CREATE_DIR_NONE, /* do NOT create missing dirs! */
CURLFTP_CREATE_DIR, /* (FTP/SFTP) if CWD fails, try MKD and then CWD
again if MKD succeeded, for SFTP this does
similar magic */
CURLFTP_CREATE_DIR_RETRY, /* (FTP only) if CWD fails, try MKD and then CWD
again even if MKD failed! */
CURLFTP_CREATE_DIR_LAST /* not an option, never use */
}
/* parameter for the CURLOPT_USE_SSL option */
enum curl_usessl {
CURLUSESSL_NONE, /* do not attempt to use SSL */
CURLUSESSL_TRY, /* try using SSL, proceed anyway otherwise */
CURLUSESSL_CONTROL, /* SSL for the control connection or fail */
CURLUSESSL_ALL, /* SSL for all communication or fail */
CURLUSESSL_LAST /* not an option, never use */
}
#define CFINIT(%0) CURLFORM_%0
enum CURLformoption {
CFINIT(NOTHING), /********* the first one is unused ************/
/* */
CFINIT(COPYNAME),
CFINIT(PTRNAME),
CFINIT(NAMELENGTH),
CFINIT(COPYCONTENTS),
CFINIT(PTRCONTENTS),
CFINIT(CONTENTSLENGTH),
CFINIT(FILECONTENT),
CFINIT(ARRAY),
CFINIT(OBSOLETE),
CFINIT(FILE),
CFINIT(BUFFER),
CFINIT(BUFFERPTR),
CFINIT(BUFFERLENGTH),
CFINIT(CONTENTTYPE),
CFINIT(CONTENTHEADER),
CFINIT(FILENAME),
CFINIT(END),
CFINIT(OBSOLETE2),
CFINIT(STREAM),
CURLFORM_LASTENTRY /* the last unused */
}
#undef CFINIT /* done */
enum CURLcode {
CURLE_OK = 0,
CURLE_UNSUPPORTED_PROTOCOL, /* 1 */
CURLE_FAILED_INIT, /* 2 */
CURLE_URL_MALFORMAT, /* 3 */
CURLE_NOT_BUILT_IN, /* 4 - [was obsoleted in August 2007 for
7.17.0, reused in April 2011 for 7.21.5] */
CURLE_COULDNT_RESOLVE_PROXY, /* 5 */
CURLE_COULDNT_RESOLVE_HOST, /* 6 */
CURLE_COULDNT_CONNECT, /* 7 */
CURLE_FTP_WEIRD_SERVER_REPLY, /* 8 */
CURLE_REMOTE_ACCESS_DENIED, /* 9 a service was denied by the server
due to lack of access - when login fails
this is not returned. */
CURLE_FTP_ACCEPT_FAILED, /* 10 - [was obsoleted in April 2006 for
7.15.4, reused in Dec 2011 for 7.24.0]*/
CURLE_FTP_WEIRD_PASS_REPLY, /* 11 */
CURLE_FTP_ACCEPT_TIMEOUT, /* 12 - timeout occurred accepting server
[was obsoleted in August 2007 for 7.17.0,
reused in Dec 2011 for 7.24.0]*/
CURLE_FTP_WEIRD_PASV_REPLY, /* 13 */
CURLE_FTP_WEIRD_227_FORMAT, /* 14 */
CURLE_FTP_CANT_GET_HOST, /* 15 */
CURLE_OBSOLETE16, /* 16 - NOT USED */
CURLE_FTP_COULDNT_SET_TYPE, /* 17 */
CURLE_PARTIAL_FILE, /* 18 */
CURLE_FTP_COULDNT_RETR_FILE, /* 19 */
CURLE_OBSOLETE20, /* 20 - NOT USED */
CURLE_QUOTE_ERROR, /* 21 - quote command failure */
CURLE_HTTP_RETURNED_ERROR, /* 22 */
CURLE_WRITE_ERROR, /* 23 */
CURLE_OBSOLETE24, /* 24 - NOT USED */
CURLE_UPLOAD_FAILED, /* 25 - failed upload "command" */
CURLE_READ_ERROR, /* 26 - couldn't open/read from file */
CURLE_OUT_OF_MEMORY, /* 27 */
/* Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error
instead of a memory allocation error if CURL_DOES_CONVERSIONS
is defined
*/
CURLE_OPERATION_TIMEDOUT, /* 28 - the timeout time was reached */
CURLE_OBSOLETE29, /* 29 - NOT USED */
CURLE_FTP_PORT_FAILED, /* 30 - FTP PORT operation failed */
CURLE_FTP_COULDNT_USE_REST, /* 31 - the REST command failed */
CURLE_OBSOLETE32, /* 32 - NOT USED */
CURLE_RANGE_ERROR, /* 33 - RANGE "command" didn't work */
CURLE_HTTP_POST_ERROR, /* 34 */
CURLE_SSL_CONNECT_ERROR, /* 35 - wrong when connecting with SSL */
CURLE_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
CURLE_FILE_COULDNT_READ_FILE, /* 37 */
CURLE_LDAP_CANNOT_BIND, /* 38 */
CURLE_LDAP_SEARCH_FAILED, /* 39 */
CURLE_OBSOLETE40, /* 40 - NOT USED */
CURLE_FUNCTION_NOT_FOUND, /* 41 */
CURLE_ABORTED_BY_CALLBACK, /* 42 */
CURLE_BAD_FUNCTION_ARGUMENT, /* 43 */
CURLE_OBSOLETE44, /* 44 - NOT USED */
CURLE_INTERFACE_FAILED, /* 45 - CURLOPT_INTERFACE failed */
CURLE_OBSOLETE46, /* 46 - NOT USED */
CURLE_TOO_MANY_REDIRECTS , /* 47 - catch endless re-direct loops */
CURLE_UNKNOWN_OPTION, /* 48 - User specified an unknown option */
CURLE_TELNET_OPTION_SYNTAX , /* 49 - Malformed telnet option */
CURLE_OBSOLETE50, /* 50 - NOT USED */
CURLE_PEER_FAILED_VERIFICATION, /* 51 - peer's certificate or fingerprint
wasn't verified fine */
CURLE_GOT_NOTHING, /* 52 - when this is a specific error */
CURLE_SSL_ENGINE_NOTFOUND, /* 53 - SSL crypto engine not found */
CURLE_SSL_ENGINE_SETFAILED, /* 54 - can not set SSL crypto engine as
default */
CURLE_SEND_ERROR, /* 55 - failed sending network data */
CURLE_RECV_ERROR, /* 56 - failure in receiving network data */
CURLE_OBSOLETE57, /* 57 - NOT IN USE */
CURLE_SSL_CERTPROBLEM, /* 58 - problem with the local certificate */
CURLE_SSL_CIPHER, /* 59 - couldn't use specified cipher */
CURLE_SSL_CACERT, /* 60 - problem with the CA cert (path?) */
CURLE_BAD_CONTENT_ENCODING, /* 61 - Unrecognized/bad encoding */
CURLE_LDAP_INVALID_URL, /* 62 - Invalid LDAP URL */
CURLE_FILESIZE_EXCEEDED, /* 63 - Maximum file size exceeded */
CURLE_USE_SSL_FAILED, /* 64 - Requested FTP SSL level failed */
CURLE_SEND_FAIL_REWIND, /* 65 - Sending the data requires a rewind
that failed */
CURLE_SSL_ENGINE_INITFAILED, /* 66 - failed to initialise ENGINE */
CURLE_LOGIN_DENIED, /* 67 - user, password or similar was not
accepted and we failed to login */
CURLE_TFTP_NOTFOUND, /* 68 - file not found on server */
CURLE_TFTP_PERM, /* 69 - permission problem on server */
CURLE_REMOTE_DISK_FULL, /* 70 - out of disk space on server */
CURLE_TFTP_ILLEGAL, /* 71 - Illegal TFTP operation */
CURLE_TFTP_UNKNOWNID, /* 72 - Unknown transfer ID */
CURLE_REMOTE_FILE_EXISTS, /* 73 - File already exists */
CURLE_TFTP_NOSUCHUSER, /* 74 - No such user */
CURLE_CONV_FAILED, /* 75 - conversion failed */
CURLE_CONV_REQD, /* 76 - caller must register conversion
callbacks using curl_easy_setopt options
CURLOPT_CONV_FROM_NETWORK_FUNCTION,
CURLOPT_CONV_TO_NETWORK_FUNCTION, and
CURLOPT_CONV_FROM_UTF8_FUNCTION */
CURLE_SSL_CACERT_BADFILE, /* 77 - could not load CACERT file, missing
or wrong format */
CURLE_REMOTE_FILE_NOT_FOUND, /* 78 - remote file not found */
CURLE_SSH, /* 79 - error from the SSH layer, somewhat
generic so the error message will be of
interest when this has happened */
CURLE_SSL_SHUTDOWN_FAILED, /* 80 - Failed to shut down the SSL
connection */
CURLE_AGAIN, /* 81 - socket is not ready for send/recv,
wait till it's ready and try again (Added
in 7.18.2) */
CURLE_SSL_CRL_BADFILE, /* 82 - could not load CRL file, missing or
wrong format (Added in 7.19.0) */
CURLE_SSL_ISSUER_ERROR, /* 83 - Issuer check failed. (Added in
7.19.0) */
CURLE_FTP_PRET_FAILED, /* 84 - a PRET command failed */
CURLE_RTSP_CSEQ_ERROR, /* 85 - mismatch of RTSP CSeq numbers */
CURLE_RTSP_SESSION_ERROR, /* 86 - mismatch of RTSP Session Ids */
CURLE_FTP_BAD_FILE_LIST, /* 87 - unable to parse FTP file list */
CURLE_CHUNK_FAILED, /* 88 - chunk callback reported error */
CURLE_NO_CONNECTION_AVAILABLE, /* 89 - No connection available, the
session will be queued */
CURL_LAST /* never use! */
}
#define CURLINFO_STRING 0x100000
#define CURLINFO_LONG 0x200000
#define CURLINFO_DOUBLE 0x300000
#define CURLINFO_SLIST 0x400000
#define CURLINFO_MASK 0x0fffff
#define CURLINFO_TYPEMASK 0xf00000
enum CURLINFO {
CURLINFO_NONE, /* first, never use this */
CURLINFO_EFFECTIVE_URL = CURLINFO_STRING + 1,
CURLINFO_RESPONSE_CODE = CURLINFO_LONG + 2,
CURLINFO_TOTAL_TIME = CURLINFO_DOUBLE + 3,
CURLINFO_NAMELOOKUP_TIME = CURLINFO_DOUBLE + 4,
CURLINFO_CONNECT_TIME = CURLINFO_DOUBLE + 5,
CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
CURLINFO_SIZE_UPLOAD = CURLINFO_DOUBLE + 7,
CURLINFO_SIZE_DOWNLOAD = CURLINFO_DOUBLE + 8,
CURLINFO_SPEED_DOWNLOAD = CURLINFO_DOUBLE + 9,
CURLINFO_SPEED_UPLOAD = CURLINFO_DOUBLE + 10,
CURLINFO_HEADER_SIZE = CURLINFO_LONG + 11,
CURLINFO_REQUEST_SIZE = CURLINFO_LONG + 12,
CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG + 13,
CURLINFO_FILETIME = CURLINFO_LONG + 14,
//CURLINFO_CONTENT_LENGTH_DOWNLOAD = CURLINFO_DOUBLE + 15,
CURLINFO_CONTENT_LENGTH_UPLOAD = CURLINFO_DOUBLE + 16,
CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18,
CURLINFO_REDIRECT_TIME = CURLINFO_DOUBLE + 19,
CURLINFO_REDIRECT_COUNT = CURLINFO_LONG + 20,
CURLINFO_PRIVATE = CURLINFO_STRING + 21,
CURLINFO_HTTP_CONNECTCODE = CURLINFO_LONG + 22,
CURLINFO_HTTPAUTH_AVAIL = CURLINFO_LONG + 23,
CURLINFO_PROXYAUTH_AVAIL = CURLINFO_LONG + 24,
CURLINFO_OS_ERRNO = CURLINFO_LONG + 25,
CURLINFO_NUM_CONNECTS = CURLINFO_LONG + 26,
CURLINFO_SSL_ENGINES = CURLINFO_SLIST + 27,
CURLINFO_COOKIELIST = CURLINFO_SLIST + 28,
CURLINFO_LASTSOCKET = CURLINFO_LONG + 29,
CURLINFO_FTP_ENTRY_PATH = CURLINFO_STRING + 30,
CURLINFO_REDIRECT_URL = CURLINFO_STRING + 31,
CURLINFO_PRIMARY_IP = CURLINFO_STRING + 32,
CURLINFO_APPCONNECT_TIME = CURLINFO_DOUBLE + 33,
CURLINFO_CERTINFO = CURLINFO_SLIST + 34,
CURLINFO_CONDITION_UNMET = CURLINFO_LONG + 35,
CURLINFO_RTSP_SESSION_ID = CURLINFO_STRING + 36,
CURLINFO_RTSP_CLIENT_CSEQ = CURLINFO_LONG + 37,
CURLINFO_RTSP_SERVER_CSEQ = CURLINFO_LONG + 38,
CURLINFO_RTSP_CSEQ_RECV = CURLINFO_LONG + 39,
CURLINFO_PRIMARY_PORT = CURLINFO_LONG + 40,
CURLINFO_LOCAL_IP = CURLINFO_STRING + 41,
CURLINFO_LOCAL_PORT = CURLINFO_LONG + 42,
CURLINFO_TLS_SESSION = CURLINFO_SLIST + 43,
/* Fill in new entries below here! */
CURLINFO_LASTONE = 43
}
#define CURLOPTTYPE_LONG 0
#define CURLOPTTYPE_OBJECTPOINT 10000
#define CURLOPTTYPE_FUNCTIONPOINT 20000
#define CURLOPTTYPE_OFF_T 30000
#define LONG CURLOPTTYPE_LONG
#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT
#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
#define OFF_T CURLOPTTYPE_OFF_T
#define CINIT(%0,%1,%2) CURLOPT_%0 = %1 + %2
enum CURLoption {
/* This is the FILE * or void * the regular output should be written to. */
CINIT(WRITEDATA, OBJECTPOINT, 1),
/* The full URL to get/put */
CINIT(URL, OBJECTPOINT, 2),
/* Port number to connect to, if other than default. */
CINIT(PORT, LONG, 3),
/* Name of proxy to use. */
CINIT(PROXY, OBJECTPOINT, 4),
/* "user:password;options" to use when fetching. */
CINIT(USERPWD, OBJECTPOINT, 5),
/* "user:password" to use with proxy. */
CINIT(PROXYUSERPWD, OBJECTPOINT, 6),
/* Range to get, specified as an ASCII string. */
CINIT(RANGE, OBJECTPOINT, 7),
/* not used */
/* Specified file stream to upload from (use as input): */
CINIT(READDATA, OBJECTPOINT, 9),
/* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
* bytes big. If this is not used, error messages go to stderr instead: */
CINIT(ERRORBUFFER, OBJECTPOINT, 10),
/* Function that will be called to store the output (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11),
/* Function that will be called to read the input (instead of fread). The
* parameters will use fread() syntax, make sure to follow them. */
CINIT(READFUNCTION, FUNCTIONPOINT, 12),
/* Time-out the read operation after this amount of seconds */
CINIT(TIMEOUT, LONG, 13),
/* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
* how large the file being sent really is. That allows better error
* checking and better verifies that the upload was successful. -1 means
* unknown size.
*
* For large file support, there is also a _LARGE version of the key
* which takes an off_t type, allowing platforms with larger off_t
* sizes to handle larger files. See below for INFILESIZE_LARGE.
*/
CINIT(INFILESIZE, LONG, 14),
/* POST static input fields. */
CINIT(POSTFIELDS, OBJECTPOINT, 15),
/* Set the referrer page (needed by some CGIs) */
CINIT(REFERER, OBJECTPOINT, 16),
/* Set the FTP PORT string (interface name, named or numerical IP address)
Use i.e '-' to use default address. */
CINIT(FTPPORT, OBJECTPOINT, 17),
/* Set the User-Agent string (examined by some CGIs) */
CINIT(USERAGENT, OBJECTPOINT, 18),
/* If the download receives less than "low speed limit" bytes/second
* during "low speed time" seconds, the operations is aborted.
* You could i.e if you have a pretty high speed connection, abort if
* it is less than 2000 bytes/sec during 20 seconds.
*/
/* Set the "low speed limit" */
CINIT(LOW_SPEED_LIMIT, LONG, 19),
/* Set the "low speed time" */
CINIT(LOW_SPEED_TIME, LONG, 20),
/* Set the continuation offset.
*
* Note there is also a _LARGE version of this key which uses
* off_t types, allowing for large file offsets on platforms which
* use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.
*/
CINIT(RESUME_FROM, LONG, 21),
/* Set cookie in request: */
CINIT(COOKIE, OBJECTPOINT, 22),
/* This points to a linked list of headers, struct curl_slist kind. This
list is also used for RTSP (in spite of its name) */
CINIT(HTTPHEADER, OBJECTPOINT, 23),
/* This points to a linked list of post entries, struct curl_httppost */
CINIT(HTTPPOST, OBJECTPOINT, 24),
/* name of the file keeping your private SSL-certificate */
CINIT(SSLCERT, OBJECTPOINT, 25),
/* password for the SSL or SSH private key */
CINIT(KEYPASSWD, OBJECTPOINT, 26),
/* send TYPE parameter? */
CINIT(CRLF, LONG, 27),
/* send linked-list of QUOTE commands */
CINIT(QUOTE, OBJECTPOINT, 28),
/* send FILE * or void * to store headers to, if you use a callback it
is simply passed to the callback unmodified */
CINIT(HEADERDATA, OBJECTPOINT, 29),
/* point to a file to read the initial cookies from, also enables
"cookie awareness" */
CINIT(COOKIEFILE, OBJECTPOINT, 31),
/* What version to specifically try to use.
See CURL_SSLVERSION defines below. */
CINIT(SSLVERSION, LONG, 32),
/* What kind of HTTP time condition to use, see defines */
CINIT(TIMECONDITION, LONG, 33),
/* Time to use with the above condition. Specified in number of seconds
since 1 Jan 1970 */
CINIT(TIMEVALUE, LONG, 34),
/* 35 = OBSOLETE */
/* Custom request, for customizing the get command like
HTTP: DELETE, TRACE and others
FTP: to use a different list command
*/
CINIT(CUSTOMREQUEST, OBJECTPOINT, 36),
/* HTTP request, for odd commands like DELETE, TRACE and others */
CINIT(STDERR, OBJECTPOINT, 37),
/* 38 is not used */
/* send linked-list of post-transfer QUOTE commands */
CINIT(POSTQUOTE, OBJECTPOINT, 39),
CINIT(OBSOLETE40, OBJECTPOINT, 40), /* OBSOLETE, do not use! */
CINIT(VERBOSE, LONG, 41), /* talk a lot */
CINIT(HEADER, LONG, 42), /* throw the header out too */
CINIT(NOPROGRESS, LONG, 43), /* shut off the progress meter */
CINIT(NOBODY, LONG, 44), /* use HEAD to get http document */
CINIT(FAILONERROR, LONG, 45), /* no output on http error codes >= 300 */
CINIT(UPLOAD, LONG, 46), /* this is an upload */
CINIT(POST, LONG, 47), /* HTTP POST method */
CINIT(DIRLISTONLY, LONG, 48), /* bare names when listing directories */
CINIT(APPEND, LONG, 50), /* Append instead of overwrite on upload! */
/* Specify whether to read the user+password from the .netrc or the URL.
* This must be one of the CURL_NETRC_* enums below. */
CINIT(NETRC, LONG, 51),
CINIT(FOLLOWLOCATION, LONG, 52), /* use Location: Luke! */
CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */
CINIT(PUT, LONG, 54), /* HTTP PUT */
/* 55 = OBSOLETE */
/* DEPRECATED
* Function that will be called instead of the internal progress display
* function. This function should be defined as the curl_progress_callback
* prototype defines. */
CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56),
/* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION
callbacks */
CINIT(PROGRESSDATA, OBJECTPOINT, 57),
#define CURLOPT_XFERINFODATA CURLOPT_PROGRESSDATA
/* We want the referrer field set automatically when following locations */
CINIT(AUTOREFERER, LONG, 58),
/* Port of the proxy, can be set in the proxy string as well with:
"[host]:[port]" */
CINIT(PROXYPORT, LONG, 59),
/* size of the POST input data, if strlen() is not good to use */
CINIT(POSTFIELDSIZE, LONG, 60),
/* tunnel non-http operations through a HTTP proxy */
CINIT(HTTPPROXYTUNNEL, LONG, 61),
/* Set the interface string to use as outgoing network interface */
CINIT(INTERFACE, OBJECTPOINT, 62),
/* Set the krb4/5 security level, this also enables krb4/5 awareness. This
* is a string, 'clear', 'safe', 'confidential' or 'private'. If the string
* is set but doesn't match one of these, 'private' will be used. */
CINIT(KRBLEVEL, OBJECTPOINT, 63),
/* Set if we should verify the peer in ssl handshake, set 1 to verify. */
CINIT(SSL_VERIFYPEER, LONG, 64),
/* The CApath or CAfile used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAINFO, OBJECTPOINT, 65),
/* 66 = OBSOLETE */
/* 67 = OBSOLETE */
/* Maximum number of http redirects to follow */
CINIT(MAXREDIRS, LONG, 68),
/* Pass a long set to 1 to get the date of the requested document (if
possible)! Pass a zero to shut it off. */
CINIT(FILETIME, LONG, 69),
/* This points to a linked list of telnet options */
CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
/* Max amount of cached alive connections */
CINIT(MAXCONNECTS, LONG, 71),
CINIT(OBSOLETE72, LONG, 72), /* OBSOLETE, do not use! */
/* 73 = OBSOLETE */
/* Set to explicitly use a new connection for the upcoming transfer.
Do not use this unless you're absolutely sure of this, as it makes the
operation slower and is less friendly for the network. */
CINIT(FRESH_CONNECT, LONG, 74),
/* Set to explicitly forbid the upcoming transfer's connection to be re-used
when done. Do not use this unless you're absolutely sure of this, as it
makes the operation slower and is less friendly for the network. */
CINIT(FORBID_REUSE, LONG, 75),
/* Set to a file name that contains random data for libcurl to use to
seed the random engine when doing SSL connects. */
CINIT(RANDOM_FILE, OBJECTPOINT, 76),
/* Set to the Entropy Gathering Daemon socket pathname */
CINIT(EGDSOCKET, OBJECTPOINT, 77),
/* Time-out connect operations after this amount of seconds, if connects are
OK within this time, then fine... This only aborts the connect phase. */
CINIT(CONNECTTIMEOUT, LONG, 78),
/* Function that will be called to store headers (instead of fwrite). The
* parameters will use fwrite() syntax, make sure to follow them. */
CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
/* Set this to force the HTTP request to get back to GET. Only really usable
if POST, PUT or a custom request have been used first.
*/
CINIT(HTTPGET, LONG, 80),
/* Set if we should verify the Common name from the peer certificate in ssl
* handshake, set 1 to check existence, 2 to ensure that it matches the
* provided hostname. */
CINIT(SSL_VERIFYHOST, LONG, 81),
/* Specify which file name to write all known cookies in after completed
operation. Set file name to "-" (dash) to make it go to stdout. */
CINIT(COOKIEJAR, OBJECTPOINT, 82),
/* Specify which SSL ciphers to use */
CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83),
/* Specify which HTTP version to use! This must be set to one of the
CURL_HTTP_VERSION* enums set below. */
CINIT(HTTP_VERSION, LONG, 84),
/* Specifically switch on or off the FTP engine's use of the EPSV command. By
default, that one will always be attempted before the more traditional
PASV command. */
CINIT(FTP_USE_EPSV, LONG, 85),
/* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
CINIT(SSLCERTTYPE, OBJECTPOINT, 86),
/* name of the file keeping your private SSL-key */
CINIT(SSLKEY, OBJECTPOINT, 87),
/* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
CINIT(SSLKEYTYPE, OBJECTPOINT, 88),
/* crypto engine for the SSL-sub system */
CINIT(SSLENGINE, OBJECTPOINT, 89),
/* set the crypto engine for the SSL-sub system as default
the param has no meaning...
*/
CINIT(SSLENGINE_DEFAULT, LONG, 90),
/* Non-zero value means to use the global dns cache */
CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91), /* DEPRECATED, do not use! */
/* DNS cache timeout */
CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
/* send linked-list of pre-transfer QUOTE commands */
CINIT(PREQUOTE, OBJECTPOINT, 93),
/* set the debug function */
CINIT(DEBUGFUNCTION, FUNCTIONPOINT, 94),
/* set the data for the debug function */
CINIT(DEBUGDATA, OBJECTPOINT, 95),
/* mark this as start of a cookie session */
CINIT(COOKIESESSION, LONG, 96),
/* The CApath directory used to validate the peer certificate
this option is used only if SSL_VERIFYPEER is true */
CINIT(CAPATH, OBJECTPOINT, 97),
/* Instruct libcurl to use a smaller receive buffer */
CINIT(BUFFERSIZE, LONG, 98),
/* Instruct libcurl to not use any signal/alarm handlers, even when using
timeouts. This option is useful for multi-threaded applications.
See libcurl-the-guide for more background information. */
CINIT(NOSIGNAL, LONG, 99),
/* Provide a CURLShare for mutexing non-ts data */
CINIT(SHARE, OBJECTPOINT, 100),
/* indicates type of proxy. accepted values are CURLPROXY_HTTP (default),
CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */
CINIT(PROXYTYPE, LONG, 101),
/* Set the Accept-Encoding string. Use this to tell a server you would like
the response to be compressed. Before 7.21.6, this was known as
CURLOPT_ENCODING */
CINIT(ACCEPT_ENCODING, OBJECTPOINT, 102),
/* Set pointer to private data */
CINIT(PRIVATE, OBJECTPOINT, 103),
/* Set aliases for HTTP 200 in the HTTP Response header */
CINIT(HTTP200ALIASES, OBJECTPOINT, 104),
/* Continue to send authentication (user+password) when following locations,
even when hostname changed. This can potentially send off the name
and password to whatever host the server decides. */
CINIT(UNRESTRICTED_AUTH, LONG, 105),
/* Specifically switch on or off the FTP engine's use of the EPRT command (
it also disables the LPRT attempt). By default, those ones will always be
attempted before the good old traditional PORT command. */
CINIT(FTP_USE_EPRT, LONG, 106),
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_USERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(HTTPAUTH, LONG, 107),
/* Set the ssl context callback function, currently only for OpenSSL ssl_ctx
in second argument. The function must be matching the
curl_ssl_ctx_callback proto. */
CINIT(SSL_CTX_FUNCTION, FUNCTIONPOINT, 108),
/* Set the userdata for the ssl context callback function's third
argument */
CINIT(SSL_CTX_DATA, OBJECTPOINT, 109),
/* FTP Option that causes missing dirs to be created on the remote server.
In 7.19.4 we introduced the convenience enums for this option using the
CURLFTP_CREATE_DIR prefix.
*/
CINIT(FTP_CREATE_MISSING_DIRS, LONG, 110),
/* Set this to a bitmask value to enable the particular authentications
methods you like. Use this in combination with CURLOPT_PROXYUSERPWD.
Note that setting multiple bits may cause extra network round-trips. */
CINIT(PROXYAUTH, LONG, 111),
/* FTP option that changes the timeout, in seconds, associated with
getting a response. This is different from transfer timeout time and
essentially places a demand on the FTP server to acknowledge commands
in a timely manner. */
CINIT(FTP_RESPONSE_TIMEOUT, LONG, 112),
#define CURLOPT_SERVER_RESPONSE_TIMEOUT CURLOPT_FTP_RESPONSE_TIMEOUT
/* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to
tell libcurl to resolve names to those IP versions only. This only has
affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */
CINIT(IPRESOLVE, LONG, 113),
/* Set this option to limit the size of a file that will be downloaded from
an HTTP or FTP server.
Note there is also _LARGE version which adds large file support for
platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below. */
CINIT(MAXFILESIZE, LONG, 114),
/* See the comment for INFILESIZE above, but in short, specifies
* the size of the file being uploaded. -1 means unknown.
*/
CINIT(INFILESIZE_LARGE, OFF_T, 115),
/* Sets the continuation offset. There is also a LONG version of this;
* look above for RESUME_FROM.
*/
CINIT(RESUME_FROM_LARGE, OFF_T, 116),
/* Sets the maximum size of data that will be downloaded from
* an HTTP or FTP server. See MAXFILESIZE above for the LONG version.
*/
CINIT(MAXFILESIZE_LARGE, OFF_T, 117),
/* Set this option to the file name of your .netrc file you want libcurl
to parse (using the CURLOPT_NETRC option). If not set, libcurl will do
a poor attempt to find the user's home directory and check for a .netrc
file in there. */
CINIT(NETRC_FILE, OBJECTPOINT, 118),
/* Enable SSL/TLS for FTP, pick one of:
CURLUSESSL_TRY - try using SSL, proceed anyway otherwise
CURLUSESSL_CONTROL - SSL for the control connection or fail
CURLUSESSL_ALL - SSL for all communication or fail
*/
CINIT(USE_SSL, LONG, 119),
/* The _LARGE version of the standard POSTFIELDSIZE option */
CINIT(POSTFIELDSIZE_LARGE, OFF_T, 120),
/* Enable/disable the TCP Nagle algorithm */
CINIT(TCP_NODELAY, LONG, 121),
/* 122 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 123 OBSOLETE. Gone in 7.16.0 */
/* 124 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 125 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 126 OBSOLETE, used in 7.12.3. Gone in 7.13.0 */
/* 127 OBSOLETE. Gone in 7.16.0 */
/* 128 OBSOLETE. Gone in 7.16.0 */
/* When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option
can be used to change libcurl's default action which is to first try
"AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK
response has been received.
Available parameters are:
CURLFTPAUTH_DEFAULT - let libcurl decide
CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS
CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL
*/
CINIT(FTPSSLAUTH, LONG, 129),
CINIT(IOCTLFUNCTION, FUNCTIONPOINT, 130),
CINIT(IOCTLDATA, OBJECTPOINT, 131),
/* 132 OBSOLETE. Gone in 7.16.0 */
/* 133 OBSOLETE. Gone in 7.16.0 */
/* zero terminated string for pass on to the FTP server when asked for
"account" info */
CINIT(FTP_ACCOUNT, OBJECTPOINT, 134),
/* feed cookies into cookie engine */
CINIT(COOKIELIST, OBJECTPOINT, 135),
/* ignore Content-Length */
CINIT(IGNORE_CONTENT_LENGTH, LONG, 136),
/* Set to non-zero to skip the IP address received in a 227 PASV FTP server
response. Typically used for FTP-SSL purposes but is not restricted to
that. libcurl will then instead use the same IP address it used for the
control connection. */
CINIT(FTP_SKIP_PASV_IP, LONG, 137),
/* Select "file method" to use when doing FTP, see the curl_ftpmethod
above. */
CINIT(FTP_FILEMETHOD, LONG, 138),
/* Local port number to bind the socket to */
CINIT(LOCALPORT, LONG, 139),
/* Number of ports to try, including the first one set with LOCALPORT.
Thus, setting it to 1 will make no additional attempts but the first.
*/
CINIT(LOCALPORTRANGE, LONG, 140),
/* no transfer, set up connection and let application use the socket by
extracting it with CURLINFO_LASTSOCKET */
CINIT(CONNECT_ONLY, LONG, 141),
/* Function that will be called to convert from the
network encoding (instead of using the iconv calls in libcurl) */
// CINIT(CONV_FROM_NETWORK_FUNCTION, FUNCTIONPOINT, 142),
/* Function that will be called to convert to the
network encoding (instead of using the iconv calls in libcurl) */
// CINIT(CONV_TO_NETWORK_FUNCTION, FUNCTIONPOINT, 143),
/* Function that will be called to convert from UTF8
(instead of using the iconv calls in libcurl)
Note that this is used only for SSL certificate processing */
CINIT(CONV_FROM_UTF8_FUNCTION, FUNCTIONPOINT, 144),
/* if the connection proceeds too quickly then need to slow it down */
/* limit-rate: maximum number of bytes per second to send or receive */
CINIT(MAX_SEND_SPEED_LARGE, OFF_T, 145),
CINIT(MAX_RECV_SPEED_LARGE, OFF_T, 146),
/* Pointer to command string to send if USER/PASS fails. */
CINIT(FTP_ALTERNATIVE_TO_USER, OBJECTPOINT, 147),
/* callback function for setting socket options */
CINIT(SOCKOPTFUNCTION, FUNCTIONPOINT, 148),
CINIT(SOCKOPTDATA, OBJECTPOINT, 149),
/* set to 0 to disable session ID re-use for this transfer, default is
enabled (== 1) */
CINIT(SSL_SESSIONID_CACHE, LONG, 150),
/* allowed SSH authentication methods */
CINIT(SSH_AUTH_TYPES, LONG, 151),
/* Used by scp/sftp to do public/private key authentication */
CINIT(SSH_PUBLIC_KEYFILE, OBJECTPOINT, 152),
CINIT(SSH_PRIVATE_KEYFILE, OBJECTPOINT, 153),
/* Send CCC (Clear Command Channel) after authentication */
CINIT(FTP_SSL_CCC, LONG, 154),
/* Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution */
CINIT(TIMEOUT_MS, LONG, 155),
CINIT(CONNECTTIMEOUT_MS, LONG, 156),
/* set to zero to disable the libcurl's decoding and thus pass the raw body
data to the application even when it is encoded/compressed */
CINIT(HTTP_TRANSFER_DECODING, LONG, 157),
CINIT(HTTP_CONTENT_DECODING, LONG, 158),
/* Permission used when creating new files and directories on the remote
server for protocols that support it, SFTP/SCP/FILE */
CINIT(NEW_FILE_PERMS, LONG, 159),
CINIT(NEW_DIRECTORY_PERMS, LONG, 160),
/* Set the behaviour of POST when redirecting. Values must be set to one
of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */
CINIT(POSTREDIR, LONG, 161),
/* used by scp/sftp to verify the host's public key */
CINIT(SSH_HOST_PUBLIC_KEY_MD5, OBJECTPOINT, 162),
/* Callback function for opening socket (instead of socket(2)). Optionally,
callback is able change the address or refuse to connect returning
CURL_SOCKET_BAD. The callback should have type
curl_opensocket_callback */
CINIT(OPENSOCKETFUNCTION, FUNCTIONPOINT, 163),
CINIT(OPENSOCKETDATA, OBJECTPOINT, 164),
/* POST volatile input fields. */
CINIT(COPYPOSTFIELDS, OBJECTPOINT, 165),
/* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy */
CINIT(PROXY_TRANSFER_MODE, LONG, 166),
/* Callback function for seeking in the input stream */
CINIT(SEEKFUNCTION, FUNCTIONPOINT, 167),
CINIT(SEEKDATA, OBJECTPOINT, 168),
/* CRL file */
CINIT(CRLFILE, OBJECTPOINT, 169),
/* Issuer certificate */
CINIT(ISSUERCERT, OBJECTPOINT, 170),
/* (IPv6) Address scope */
CINIT(ADDRESS_SCOPE, LONG, 171),
/* Collect certificate chain info and allow it to get retrievable with
CURLINFO_CERTINFO after the transfer is complete. */
CINIT(CERTINFO, LONG, 172),
/* "name" and "pwd" to use when fetching. */
CINIT(USERNAME, OBJECTPOINT, 173),
CINIT(PASSWORD, OBJECTPOINT, 174),
/* "name" and "pwd" to use with Proxy when fetching. */
CINIT(PROXYUSERNAME, OBJECTPOINT, 175),
CINIT(PROXYPASSWORD, OBJECTPOINT, 176),
/* Comma separated list of hostnames defining no-proxy zones. These should
match both hostnames directly, and hostnames within a domain. For
example, local.com will match local.com and www.local.com, but NOT
notlocal.com or www.notlocal.com. For compatibility with other
implementations of this, .local.com will be considered to be the same as
local.com. A single * is the only valid wildcard, and effectively
disables the use of proxy. */
CINIT(NOPROXY, OBJECTPOINT, 177),
/* block size for TFTP transfers */
CINIT(TFTP_BLKSIZE, LONG, 178),
/* Socks Service */
CINIT(SOCKS5_GSSAPI_SERVICE, OBJECTPOINT, 179),
/* Socks Service */
CINIT(SOCKS5_GSSAPI_NEC, LONG, 180),
/* set the bitmask for the protocols that are allowed to be used for the
transfer, which thus helps the app which takes URLs from users or other
external inputs and want to restrict what protocol(s) to deal
with. Defaults to CURLPROTO_ALL. */
CINIT(PROTOCOLS, LONG, 181),
/* set the bitmask for the protocols that libcurl is allowed to follow to,
as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
to be set in both bitmasks to be allowed to get redirected to. Defaults
to all protocols except FILE and SCP. */
CINIT(REDIR_PROTOCOLS, LONG, 182),
/* set the SSH knownhost file name to use */
CINIT(SSH_KNOWNHOSTS, OBJECTPOINT, 183),
/* set the SSH host key callback, must point to a curl_sshkeycallback
function */
CINIT(SSH_KEYFUNCTION, FUNCTIONPOINT, 184),
/* set the SSH host key callback custom pointer */
CINIT(SSH_KEYDATA, OBJECTPOINT, 185),
/* set the SMTP mail originator */
CINIT(MAIL_FROM, OBJECTPOINT, 186),
/* set the SMTP mail receiver(s) */
CINIT(MAIL_RCPT, OBJECTPOINT, 187),
/* FTP: send PRET before PASV */
CINIT(FTP_USE_PRET, LONG, 188),
/* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */
CINIT(RTSP_REQUEST, LONG, 189),
/* The RTSP session identifier */
CINIT(RTSP_SESSION_ID, OBJECTPOINT, 190),
/* The RTSP stream URI */
CINIT(RTSP_STREAM_URI, OBJECTPOINT, 191),
/* The Transport: header to use in RTSP requests */
CINIT(RTSP_TRANSPORT, OBJECTPOINT, 192),
/* Manually initialize the client RTSP CSeq for this handle */
CINIT(RTSP_CLIENT_CSEQ, LONG, 193),
/* Manually initialize the server RTSP CSeq for this handle */
CINIT(RTSP_SERVER_CSEQ, LONG, 194),
/* The stream to pass to INTERLEAVEFUNCTION. */
CINIT(INTERLEAVEDATA, OBJECTPOINT, 195),
/* Let the application define a custom write method for RTP data */
CINIT(INTERLEAVEFUNCTION, FUNCTIONPOINT, 196),
/* Turn on wildcard matching */
CINIT(WILDCARDMATCH, LONG, 197),
/* Directory matching callback called before downloading of an
individual file (chunk) started */
CINIT(CHUNK_BGN_FUNCTION, FUNCTIONPOINT, 198),
/* Directory matching callback called after the file (chunk)
was downloaded, or skipped */
CINIT(CHUNK_END_FUNCTION, FUNCTIONPOINT, 199),
/* Change match (fnmatch-like) callback for wildcard matching */
CINIT(FNMATCH_FUNCTION, FUNCTIONPOINT, 200),
/* Let the application define custom chunk data pointer */
CINIT(CHUNK_DATA, OBJECTPOINT, 201),
/* FNMATCH_FUNCTION user pointer */
CINIT(FNMATCH_DATA, OBJECTPOINT, 202),
/* send linked-list of name:port:address sets */
CINIT(RESOLVE, OBJECTPOINT, 203),
/* Set a username for authenticated TLS */
CINIT(TLSAUTH_USERNAME, OBJECTPOINT, 204),
/* Set a password for authenticated TLS */
CINIT(TLSAUTH_PASSWORD, OBJECTPOINT, 205),
/* Set authentication type for authenticated TLS */
CINIT(TLSAUTH_TYPE, OBJECTPOINT, 206),
/* Set to 1 to enable the "TE:" header in HTTP requests to ask for
compressed transfer-encoded responses. Set to 0 to disable the use of TE:
in outgoing requests. The current default is 0, but it might change in a
future libcurl release.
libcurl will ask for the compressed methods it knows of, and if that
isn't any, it will not ask for transfer-encoding at all even if this
option is set to 1.
*/
CINIT(TRANSFER_ENCODING, LONG, 207),
/* Callback function for closing socket (instead of close(2)). The callback
should have type curl_closesocket_callback */
CINIT(CLOSESOCKETFUNCTION, FUNCTIONPOINT, 208),
CINIT(CLOSESOCKETDATA, OBJECTPOINT, 209),
/* allow GSSAPI credential delegation */
CINIT(GSSAPI_DELEGATION, LONG, 210),
/* Set the name servers to use for DNS resolution */
CINIT(DNS_SERVERS, OBJECTPOINT, 211),
/* Time-out accept operations (currently for FTP only) after this amount
of miliseconds. */
CINIT(ACCEPTTIMEOUT_MS, LONG, 212),
/* Set TCP keepalive */
CINIT(TCP_KEEPALIVE, LONG, 213),
/* non-universal keepalive knobs (Linux, AIX, HP-UX, more) */
CINIT(TCP_KEEPIDLE, LONG, 214),
CINIT(TCP_KEEPINTVL, LONG, 215),
/* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */
CINIT(SSL_OPTIONS, LONG, 216),
/* Set the SMTP auth originator */
CINIT(MAIL_AUTH, OBJECTPOINT, 217),
/* Enable/disable SASL initial response */
CINIT(SASL_IR, LONG, 218),
/* Function that will be called instead of the internal progress display
* function. This function should be defined as the curl_xferinfo_callback
* prototype defines. (Deprecates CURLOPT_PROGRESSFUNCTION) */
CINIT(XFERINFOFUNCTION, FUNCTIONPOINT, 219),
/* The XOAUTH2 bearer token */
CINIT(XOAUTH2_BEARER, OBJECTPOINT, 220),
/* Set the interface string to use as outgoing network
* interface for DNS requests.
* Only supported by the c-ares DNS backend */
CINIT(DNS_INTERFACE, OBJECTPOINT, 221),
/* Set the local IPv4 address to use for outgoing DNS requests.
* Only supported by the c-ares DNS backend */
CINIT(DNS_LOCAL_IP4, OBJECTPOINT, 222),
/* Set the local IPv4 address to use for outgoing DNS requests.
* Only supported by the c-ares DNS backend */
CINIT(DNS_LOCAL_IP6, OBJECTPOINT, 223),
/* Set authentication options directly */
CINIT(LOGIN_OPTIONS, OBJECTPOINT, 224),
/* Enable/disable TLS NPN extension (http2 over ssl might fail without) */
CINIT(SSL_ENABLE_NPN, LONG, 225),
/* Enable/disable TLS ALPN extension (http2 over ssl might fail without) */
CINIT(SSL_ENABLE_ALPN, LONG, 226),
/* Time to wait for a response to a HTTP request containing an
* Expect: 100-continue header before sending the data anyway. */
CINIT(EXPECT_100_TIMEOUT_MS, LONG, 227),
/* This points to a linked list of headers used for proxy requests only,
struct curl_slist kind */
CINIT(PROXYHEADER, OBJECTPOINT, 228),
/* Pass in a bitmask of "header options" */
CINIT(HEADEROPT, LONG, 229),
CURLOPT_LASTENTRY /* the last unused */
}
#undef LONG
#undef OBJECTPOINT
#undef FUNCTIONPOINT
#undef OFF_T
#undef CINIT
Reference in New Issue View Git Blame Copy Permalink