Merge pull request #35 from kubedzero/master

Update llfuse-1.3.6 to 1.3.8 to fix borg mount, add llfuse SlackBuild

source/SlackBuild/llfuse/README

@@ -1,8 +0,0 @@
-LLFUSE is a set of Python bindings for the low level FUSE API. It requires at
-least FUSE 2.8.0 and supports both Python 2.x and 3.x.
-
-LLFUSE was originally part of S3QL, but has been factored out so that it can
-be used by other projects as well.
-
-The SlackBuild detects presence of Python 3.x and if found,
-then also bindings for Python 3.x are built.

source/SlackBuild/llfuse/README.md

@@ -0,0 +1,94 @@
+## Package Description
+
+LLFUSE is a set of Python bindings for the low level FUSE API. It requires at
+least FUSE 2.8.0 and supports both Python 2.x and 3.x.
+
+LLFUSE was originally part of S3QL, but has been factored out so that it can
+be used by other projects as well.
+
+The SlackBuild detects presence of Python 3.x and if found,
+then also bindings for Python 3.x are built.
+
+Python-LLFUSE is no longer actively maintained. Unless you are stuck with Python 2.x or libfuse 2.x, we recommended to use the pyfuse3 module instead: https://github.com/libfuse/pyfuse3
+
+## kubedzero notes
+
+* I set up Slackware-current (15.0) based on a Princeton ISO http://mirror.math.princeton.edu/pub/slackware/slackware-iso/slackware-current-iso/ and then updated all the packages.
+* I made sure `fuse-2.9.9` and `fuse3-3.10.0` were installed, along with `python`, `python3`, `pip`, and `setuptools`
+* I copied over `slack-desc` and `llfuse.SlackBuild` from this repository, making sure the SlackBuild is executable. The other files don't seem to be used.
+* I then downloaded the latest ZIP source of llfuse from https://github.com/python-llfuse/python-llfuse/archive/release-1.3.8.zip and put it in the same directory as the SlackBuild script.
+* Finally, I executed the SlackBuild script. It unzips the Github source archive to a directory created in `/tmp/` and runs `setup.py build_cython` as well as `setup.py install` with both Python 2 and Python 3. It also copies some other files over, and then packages the compiled files into a Slack-installable `/tmp/llfuse-1.3.8-x86_64-1_SBo.txz` file
+* NOTE: The SlackBuild script will need to be updated with a new version number to build future versions of this library
+* NOTE: https://github.com/python-llfuse/python-llfuse/blob/master/developer-notes/release-process.md had some additional setup and development notes
+* NOTE: If you see `gcc: error: src/llfuse.c: No such file or directory` after `gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-pro -o build/temp.linux-x86_64-2.7/src/llfuse.o -D_FILE_OFFSET_BITS=64 -I/usr/include/-Wsign-compare -DLLFUSE_VERSION="1.3.7" -Wno-unused-function -Wno-implicit-fallthroerror=unreachable-code -Werror=conversion -Werror=sign-compare -fno-strict-aliasing` it's possible that `setup.py build_cython` did not run to completion and thus did not create the compiled `.c` files
+
+ ## Package versions
+
+ These are the package versions installed during the 2020/11 build of llfuse:
+
+ ```
+ Package        Version
+-------------- ---------
+-lxc           0.1
+appdirs        1.4.4
+Brotli         1.0.9
+caca           0.99b19
+certifi        2020.11.8
+chardet        3.0.4
+cupshelpers    1.0
+Cython         0.29.21
+distro         1.5.0
+docutils       0.16
+future         0.18.2
+getmail6       6.9
+gpg            1.14.0
+gyp            0.1
+idna           2.10
+include-server 3.3.3
+isc            2.0
+libwebp        0.0
+M2Crypto       0.36.0
+Mako           1.1.3
+mercurial      5.6
+meson          0.56.0
+netsnmp-python 1.0a1
+notify2        0.3.1
+packaging      20.4
+Pillow         8.0.1
+pip            20.2.4
+ply            3.11
+pssh           2.3.4
+pwquality      1.4.4
+pycairo        1.20.0
+pycups         2.0.1
+pycurl         7.43.0.6
+Pygments       2.7.2
+PyGObject      3.36.1
+pyparsing      2.4.7
+PyQt4-sip      4.19.23
+PyQt5          5.15.1
+PyQt5-sip      12.8.1
+python-sane    2.8.3
+pyxdg          0.27
+QScintilla     2.11.5
+requests       2.25.0
+rpm            4.16.0
+SCons          4.0.1
+setuptools     50.3.2
+sip            5.4.0
+six            1.15.0
+toml           0.10.2
+undervolt      0.3.0
+urllib3        1.26.2
+```
+
+```
+root@slack:~# slackpkg search <packageName>
+
+[ installed ] - fuse-2.9.9-x86_64-1
+[ installed ] - fuse3-3.10.0-x86_64-1
+[ installed ] - python-pip-20.2.4-x86_64-2
+[ installed ] - python-setuptools-50.3.2-x86_64-2
+[ installed ] - python2-2.7.18-x86_64-2
+[ installed ] - python3-3.9.0-x86_64-1
+```

source/SlackBuild/llfuse/llfuse.SlackBuild

@@ -1,32 +1,39 @@
 #!/bin/sh
 
-# Slackware build script for LLFUSE
+# Slackware build script for "llfuse".
+# Adapted by kubedzero from https://slackbuilds.org/repository/14.2/python/llfuse/
 
-# Copyright 2015 Andrzej Telszewski, Sabadell
+# Copyright 2015-2016 Andrzej Telszewski, Sabadell
+# Copyright 2016 Marcel Saegebarth <marc@mos6581.de>
 # All rights reserved.
 #
-# Redistribution and use of this script, with or without modification, is
+# Redistribution and use in source and binary forms, with or without
-# permitted provided that the following conditions are met:
+# modification, are permitted provided that the following conditions are
+# met:
 #
-# 1. Redistributions of this script must retain the above copyright
+# * Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
+# notice, this list of conditions and the following disclaimer.
 #
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# Set these to tell the script what input/output files to use
 PRGNAM=llfuse
 VERSION=${VERSION:-1.3.8}
+ARCHIVE="python-$PRGNAM-release-$VERSION"
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
+# Determine architecture of build system
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
     i?86) ARCH=i486 ;;
@@ -35,11 +42,6 @@ if [ -z "$ARCH" ]; then
   esac
 fi
 
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
 if [ "$ARCH" = "i486" ]; then
   SLKCFLAGS="-O2 -march=i486 -mtune=i686"
   LIBDIRSUFFIX=""
@@ -54,14 +56,27 @@ else
   LIBDIRSUFFIX=""
 fi
 
-set -e
+# Halt on errors and print out each variable's state
+set -ex
 
+# NOTE: script checks working directory, execute from within same dir
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+# remove existing build output and recreate build directories
 rm -rf $PKG
 mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
-rm -rf $PRGNAM-$VERSION
+rm -rf "$PRGNAM-$VERSION" "$ARCHIVE"
-tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+
-cd $PRGNAM-$VERSION
+# Unzip the repository code, rename it, and move into that directory
+unzip "$CWD/$ARCHIVE.zip"
+mv "$ARCHIVE" "$PRGNAM-$VERSION"
+cd "$PRGNAM-$VERSION"
+
+# Set permissions on files in the unzipped repository
 chown -R root:root .
 find -L . \
  \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
@@ -69,25 +84,39 @@ find -L . \
  \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
   -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
 
+# Assumes Cython is already installed, build the C files in the repo
+python setup.py build_cython
+
+# Run the install using GCC, outputting to the $PKG build output
 python setup.py install --root=$PKG
 
-# Python 3 support.
+# Python 3 support, rebuild using Python3
 if $(python3 -c 'import sys' 2>/dev/null); then
+  python3 setup.py build_cython
   python3 setup.py install --root=$PKG
 fi
 
+# Consecutive filtering of files and text to confirm the output is present
 find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
+# Copy the documentation files into the $PKG build output
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/html
+cp -a examples Changes.rst LICENSE README.rst $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a examples LICENSE $PKG/usr/doc/$PRGNAM-$VERSION
+
-cp -a doc/html/*.html doc/html/searchindex.js doc/html/_static \
+## Copy the HTML documentation as well. Needs a certain Python build target,
-      $PKG/usr/doc/$PRGNAM-$VERSION/html
+## otherwise this doesn't succeed. Commented out for compatibility
+# mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/html
+# cp -a doc/html/*.html doc/html/searchindex.js doc/html/_static \
+#       $PKG/usr/doc/$PRGNAM-$VERSION/html
+
+# Copy the build script to the $PKG build output as well
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 
+# Copy the Slackware slack-desc text file to the $PKG build output
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 
+# Go to the $PKG build output and actually build the compiled TXZ package
 cd $PKG
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-txz}

source/SlackBuild/llfuse/llfuse.info

@@ -1,10 +1,10 @@
 PRGNAM="llfuse"
-VERSION="0.40"
+VERSION="1.3.8"
-HOMEPAGE="https://bitbucket.org/nikratio/python-llfuse/"
+HOMEPAGE="https://github.com/python-llfuse/python-llfuse"
-DOWNLOAD="https://bitbucket.org/nikratio/python-llfuse/downloads/llfuse-0.40.tar.bz2"
+DOWNLOAD="https://github.com/python-llfuse/python-llfuse/archive/release-1.3.8.zip"
-MD5SUM="bd8d07ddb6061ab03816e636efa37b5b"
+MD5SUM="ed0164e4aaa62f4f0f302180b2a0b2e6"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
-REQUIRES="pysetuptools"
+REQUIRES=""
-MAINTAINER="Andrzej Telszewski"
+MAINTAINER="ThomasWaldmann"
-EMAIL="atelszewski@gmail.com"
+EMAIL="tw@waldmann-edv.de"

source/SlackBuild/llfuse/slack-desc

@@ -11,9 +11,9 @@ llfuse:
 llfuse: LLFUSE is a set of Python bindings for the low level FUSE API.
 llfuse: It requires at least FUSE 2.8.0 and supports both Python 2.x and 3.x.
 llfuse:
-llfuse: Homepage: https://bitbucket.org/nikratio/python-llfuse/
+llfuse: Warning - no longer maintained
-llfuse:
+llfuse: Python-LLFUSE is no longer actively maintained. Unless you are stuck 
-llfuse:
+llfuse: with Python 2.x or libfuse 2.x, use the pyfuse3 module instead.
-llfuse:
 llfuse:
+llfuse: Homepage: https://github.com/python-llfuse/python-llfuse
 llfuse: